Friday, November 6, 2009
combining audio for comping ...
Hello all, Is it possible to create a comp take folder with audio that was recorded on separate tracks? I recorded a piano piece that is very rubato and therefore won't work with a click. Because the timing of each take won't line up precisely, I recorded 3 takes to different tracks, rather than as a comp folder. I think in Logic 9 you can nudge individual takes within a comp folder, but I'm using Logic 8 and I don't think it will do that.
Is there a way to line up individual sections that need to be replaced, and create a comp folder? Or what is the best way to comp this type of audio?
Thanks for your help!
Orignal From: combining audio for comping ...
Logic / OS X randomly losing ...
Hi
Connected to my MBP I have a Lacie FW drive with an Apogee Duet daisy chained to this.
During a Logic session yesterday all of a sudden I received device removal (warning) messages for these two items although they were still connected to the relevant ports!? I also had to force quit Logic following this.
When I reconnnected the devices were recognised but things were still not right as when I tried to change the volume on the duet the system was very slow in responding.
I was running of the battery power but this has never happened before whether connected to the mains or the battery.
Any ideas/should I worry?
Everything seemed fine a couple of hours later when I restarted the system but I am uneasy about the potential for this to occur during a more important session.
Any advice greatly appreciated
Cheers
Sam
Orignal From: Logic / OS X randomly losing ...
Logic is over riding MIDI learn in RMX ...
Hi
I use a Kontrol 49, Logic 9 and the spectrasonics plug-ins. For some strange reason, when I select MIDI learn in RMX Stylus or another plug-in, it won't work as the focus seems to be on moving a slider in Logic. Are MIDI learn templates controlled by RMX, the K49 or Logic? I've been trying to work it out for hours to no avail so any help in resetting my MIDI learn feature would be very much appreciated.
Thanks
Martin
Orignal From: Logic is over riding MIDI learn in RMX ...
No output sound in headphones when ...
I have an 88.2 kHz, 24-bit session. I'm using Logic Pro 8.0.2. I'm trying to record vocals and electric guitar, but there is a big problem. I cannot hear myself when I sing or play the guitar in my headphones when the track is record enabled. I can only hear what I have recorded once I stop recording and play it back. Also, Guitar Amp Pro does not produce any sound when record enabled. I am using the "Inst" input on my audio interface. I set the levels just right, but I do not get the output signal, which means that I can either only hear the faint input signal, or not hear anything at all. I checked that Auto Input Monitoring is off, unless I'm punch recording. I also checked the buffer, which is at a 512, which is just right for me.
How can I fix this problem? I can only feel my voice, not hear it in my headphones. There must be an easy fix. This did not use to happen before. I even tried using the Input monitoring button on the record enabled track, but that does not give me the wet sound coming out of Guitar Amp Pro. I want to hear the signal coming out of Logic, not what is going in. The outputs of the tracks read "Output 1-2", which is what I need. Unfortunately, I can only hear the output signal when I play the recording back. Needless to say, this kills the recording vibe quite a bit. Any suggestions? Thanks.
Orignal From: No output sound in headphones when ...
HELP! Recordings out of time! ...
So I'm in the middle of a project, and up until now, everything has been gonig smoothly. But lately, when I record something, I go to play it back, and it is few ticks later than it was actually recorded.
Yes, I am current on all software and drivers for my interface.
What could be causing this?
Orignal From: HELP! Recordings out of time! ...
**HELP** CD SKIP EFFECT ...
Hello Everyone, Linkin Park has a song titled "IN THE END":
hxxp://www.youtube.com/watch?v=jpYD6cjx5M0
Orignal From: **HELP** CD SKIP EFFECT ...
channel strip settings
Hey guys, I just installed my friends copy of logic 8 on my computer because I wanted to see the difference between 7 and 8. I currently use 7. After installing all my channel strip settings and plugin settings for both dissapear. What should I do? Logic 8 and 7 cannot be together?
Let me know if should I re-install or there's a way to just install the settings
thanks
Orignal From: channel strip settings
Soundtrack Pro and Compressor greyed ...
For some reason the option to install Soundtrack Pro and Compressor are greyed out when performing installation of Logic Stdio.
I had installed Logic Studio previously but ran out of disk space and so uninstalled the program, upgraded my hard drive and I'm now at the point of reinstallation - but can't install those two programs.
Here's a screen shot of what I get AFTER installing what I can:
http://www.btinternet.com/~wack/screen.jpg
Also, why do some of the programs have 'upgrade' under Action?
Thanks.
Orignal From: Soundtrack Pro and Compressor greyed ...
Saving a preset... Access Denied! ...
Okay, I'm trying to save a preset. I've tweeked apple's "velocity bass" (es2) and I want to save my tweaked version. Apple says:
Couldn't create file!
Permission was denied, probably due to insufficient access rights.
What is this about? I want to save this preset so I can use it in another project! Obnoxious! Help!
Orignal From: Saving a preset... Access Denied! ...
V-Station ...
Hi,
Ive installed the AU version of V-Station on my mac, it shows up in the AU manager as "successfully validated", it has a tick in the box but I am unable to locate it. I look in the AU section under the insert tab on the left and its not listed? Any ideas why please?
Thanks
Orignal From: V-Station ...
Changing the Instrument Name in Score ...
I've modified the Orchestral Template to create my own desired orchestral set up and changed the track names of the instruments and also applied these new names to their corresponding regions but in score view the old names (provided by the template) are still the ones that show up. I've had this problem before when not starting from a Logic template. How do I change instrument names i score view?
Orignal From: Changing the Instrument Name in Score ...
Did compressor plugin presets disappear ...
After I upgraded from Logic 8 to Logic 9, I notice that many of the Compressor plugin presets seemed to have disappeared, replaced by a new set. I miss the easy settings like "rock vocal" and the like. Are they gone for good, or was there a glitch in my installation that somehow removed the old files?
Orignal From: Did compressor plugin presets disappear ...
Logic 9 Upgrade to a new Imac ...
I've ordered one of the new quad core iMacs and would like to do a clean install of Logic Studio as I ran into problems when I upgraded from 7 to 8 with the missing EXS sample problem.
Since I am a registered Logic owner, if I purchase the upgrade package for Logic 9 can I do a clean install on my new iMac without having 8 installed. I assume there will be some sort of validation when I use the upgrade to ensure I own 8. What is it and has anyone done a clean install from the upgrade dvds
Thanks
JN
Orignal From: Logic 9 Upgrade to a new Imac ...
Ultrabeat help ...
Hey
Just trying to get an ultrabeat pattern into the arrange window, as midi data.
i'm sure pretty simple but...
thanks
Orignal From: Ultrabeat help ...
Software Instrument Audio Won't Play ...
Recorded Celesta onto a software instrument track. I can see the MIDI info in the region display and can also see and trigger the notes in the Piano Roll editor - but when I play it back, I get no audio. I've checked to make sure the track is not muted, the notes are not muted, I have it assigned to out 1/2 just like everything else, and the volume automation indicates 0.0db level (default). Has anyone experienced this? I've had this happen on some other recordings of software instruments as well.
Help! Thanks.
dbird
Orignal From: Software Instrument Audio Won't Play ...
MIDI editing question ...
Here's my deal. I am recording drums in the piano roll editor using a midi controller and drum software. I record in sections, meaning I'll record a kick and snare beat, then go back and layer a cymbal or something. This produces both recordings and I am able to hear both. However this creates a new midi piece on the same track that I have to click on separately in order to view in the piano roll. I would like to be able to combine these 2 recordings so that I will be able to view them and edit them at the same time. I tried using the manual, looking for something like "combining midi tracks" or something similar, but cannot find a solution. Any help is appreciated.
Orignal From: MIDI editing question ...
Logic 9.0.2 Disk slow .... Post your ...
Hi Im not sure if im the only one there seems to be a a real mix of issues here so I thought all those people should make a hardware comparision list to look for related issues
Machine
Mac Pro 2008 2 x 3ghz Quad core Xeon
10.5.8 (have installed the combo update twice to remove disk perm issues reported with the update)
12 gig of Ram
Drives
SAMSUNG Spinpoint F1 HD103UJ:
Capacity: 931.51 GB
Splt into 2 halfs System and Audio backup
both over 100gb free
SAMSUNG Spinpoint F1 HD103UJ:
Capacity: 931.51 GB
Splt into 2 halfs System backup and Audio
both over 100gb free
WDC WD5000AAKS-41YGA0:
Capacity: 465.76 GB
Just contains install data
Logic version and plugins used
Logic 9.0.2
PSP Vintage Warmer 2
T-Racks 3
Izotope Alloy
Ampeg
Kontakt 3.5
Decimort
Sonalksis Maxlimit
Sonalksis SV315Mk2
FabFilter Volcano
FabFilter Pro C
Guitair Rig
KR Fatter
Ozone 4
Alchemy
Dimension Pro
Does the same track plays with no issues in Logic 7 or 8
in my case it does
LASTLY WHAT IS THE EXACT ERROR CODE
Disk is to slow or system overload. (-10008)
Orignal From: Logic 9.0.2 Disk slow .... Post your ...
Trilian Bass Software / Logic ...
So, is anyone else having trouble using the new Trilian bass software in Logic 9? It keeps crashing my system (specs below), which has been powerful enough to handle anything else I've thrown at it up until now (Ivory, BFD2, etc.). I sent a message to their tech support yesterday, but I'm still waiting for a response. I know you can adjust certain parameters within the Trilian control panel. Any advice for the best crash-proof settings?
Thanks,
Brian
Orignal From: Trilian Bass Software / Logic ...
How to create blank sheet music for ...
Does anyone know how I can create blank score in logic, so I can print out sheet music I can print out and hand-write music on? I know how to create the blank scores by creating regions in the arrange page which then can be viewed as pages of score in the score window but every bar shows a rest using this method. How do I remove this rest?
Orignal From: How to create blank sheet music for ...
Getting rid of annoying CLICKING NOISE ...
Hey everyone. I do really basic recording in Logic Pro 8. It's only a one-track recording of my drums, miced up and connected to a Mackie mixer, then to a Omega USB Lexicon Interface. Anyway, I really need help with this really annoying click (like a metronome) that comes up everytime I start recording. It is really annoying because I am trying to drum to the song or just soloing and I have to deal with a really slow tempo click and makes me loose beat.
Does anyone know how to get rid of it? Any input would be greatly appreciated.
If anyone's wondering, I'm using a 15" MID 2009 Macbook Pro, 2.66GHz Intel C2D, 4GB of RAM and running Snow Leopard 10.6.1 hooked up to a 24" Apple LED Cinema Display.
Message was edited by: DrummerGS
Message was edited by: DrummerGS
Orignal From: Getting rid of annoying CLICKING NOISE ...
Logic 9 vs HD system ...
Hi,
I'm trying to use the 32 ins and outs from our 2x 96 I/O's and a Sonic Core A16 in Logic 9.
I'm able to do this in Pro Tools it seems, but is this actually possible in Logic?
I've been trying to use Core Audio with DAE, DAE and TDM, Core Audio and TDM, but no results yet. Core Audio alone of course only offers me 8 ins and outs.
Am I being a newbie, or is something up?
Any thoughts of wisdom would be most appreciated!
Cheers,
Ross
Orignal From: Logic 9 vs HD system ...
copying mixer settings ...
i've tried using the copy audio configuration in the mixer options drop down menu to transfer my rough mix to other projects but when i paste it to the next one i lose some software instruments and my stereo out gets renamed as click and goes mono.
second thing, if i change the song tempo after recording audio some of the tracks change speed and some don't.
are these bugs they haven't worked out yet or am i doing something wrong?
Orignal From: copying mixer settings ...
updating/performance ...
So far I'm still running OS 10.3.9 with Logic 7.1 on my G5 2.0Ghz with 3G of Ram. Sense everything is running very smooth I did not update to Logic 8.
But now it's really getting late and I want to update to Logic 9 with OS 10.5
Does anybody know what effects this will bring in terms of performance.
I'm afraid that the new setup would cause less performance with the old G5. If this is the case, I will wait and do the update later with a new intel mac.
Does anbody know about that ?
Martin
Orignal From: updating/performance ...
What is the best way to compress voice? ...
I made a recording of a 2 hour meeting using garageband. Now I need to e-mail it to somebody - that means I need it less than 25Mb.
What's the best way to get it down to this level? It is currently 62Mb in Garageband.
I've tried pulling it onto logic, turning it from stereo to mono, getting it down to 16 bit recording and deleting silence - but the file seems to get bigger!
Orignal From: What is the best way to compress voice? ...
Bounce distortion ...
I am not aware that I have changed any settings, but suddenly everything I bounce out of Logic Pro v8 is massively overdriven and distorted. The original audio files are fine and it all sounds fine within logic and appears normal. But the bounces sound awful.
Orignal From: Bounce distortion ...
NY Logic Pro Users Group: Next Meeting ...
Announcement:? NY Logic Pro Users Group Meeting
The first NYLPUG meeting of the Logic 9 era will take place on Thursday, November 19th, 6 PM at Tekserve in Manhattan.
Part 1: Steve and Jonathan will lead an overview and answer some questions of what's new and happening in Logic 9.? We can't wait to "flex" our Logic chops!
Part 2: And while we are at it, we will host a guest appearance for a portion of the meeting:? Luke Smith, of Euphonix, will be on hand to give us a detailed look at their control surfaces, and how they can be used with Logic 9.? Luke will give us a live demo, and be on hand to answer questions.
We miss you, so please come out to the meeting.? As usual, RSVPs are appreciated: jonathan@nylpug.com.
Mac Audio Trainer news
New Apple Certified Training courseware for Logic 9 is shipping next week.? Steve and I will be offering our first updated Logic 101 course from December 18th-20th.? NYLPUG members receive a discount.? See http://www.macaudiotrainers.com/certcoursesregistration.cfm.
See you there!
Jonathan
Orignal From: NY Logic Pro Users Group: Next Meeting ...
How do I get the "live performance" ...
I recorded a live performance, but I didn't run audience mics. Is there a setting that I can do that I can send the multi-tracks to that will give a more "live" feel?
Orignal From: How do I get the "live performance" ...
Channel Strip insert question ...
I recorded several takes of a small group into different channels. I eq'd the mics to the room, but it takes forever to select that eq setting to each channel. Is there a way to select every channel and choose the insert setting in mass without having to do every one individually?
Orignal From: Channel Strip insert question ...
Logic 8, audio turning off during ...
Greetings,
When I am working on production, with multiple plug instruments, also audio tracks in the arrange window, sometimes the audio will completely turn off. Logic's gui is still responsive normally, however the disc and CPU indicators are not showing any activity. The only way I've been able to restore this is, in the options by turning the core audio off then back on. Then Logic will work fine for awhile until it happens again. I can't seem to find any coorelation or predictability when this happens, but it usually does every few minutes. My projects are not nearly large enough to max out the CPU/Disk. I've verified even a few tracks with simple softsynths by various manufactures will trigger this behavior as well. Any help would be appreciated please!
Regards,
I use plugins by Native instruments, M-Audio/Gforce, Arturia, TC electronics powercore at this point, along with Logic's instrumentation.
Orignal From: Logic 8, audio turning off during ...
Subscribe to:
Posts (Atom)